Fully Enclosed Optical Fiber Distribution Frame

Optical fiber distribution frame fully enclosedOptical fiber distribution frame fully enclosed is mainly used for the end-end and distribution of the backbone optical fiber cable in the optical fiber communication system, which can conveniently realize the connection, distribution and scheduling of the optical fiber line, and is

Featured Products

Optical fiber distribution frame fully enclosed

Optical fiber distribution frame fully enclosed is mainly used for the end-end and distribution of the backbone optical fiber cable in the optical fiber communication system, which can conveniently realize the connection, distribution and scheduling of the optical fiber line, and is the wiring connection device of the optical cable and the optical communication device.
The complete internal equipment installation and wiring scheme is provided inside the rack, which realizes the normalized management of wiring, optimizes the optical fiber and various cable routing, and saves space.The frame is designed according to the 19" standard installation interface, which is divided into total enclosed type and semi-enclosed type according to the structure.

Performance characteristics: 
·Totally enclosed cabinet structure, good dustproof, physical protection of the cable end and wiring to avoid accidental damage.
·The fiber distribution box (unit box) integrates the functions of fiber fusion, pigtail storage and wiring, and is easy to use and maintain. It is suitable for installation of various types of adapters.
·The fiber optic cable can be fixed, grounded and protected by the top or bottom of the rack. The fixed metal part of the cable is connected to the high voltage protective grounding device and insulated from the frame.
·The frame design adopts modular structure, which can be flexibly configured according to different requirements to realize the installation of the frame, which is convenient for capacity increase; the left and right side plates can be detached, and the racks can be connected without barriers.
·The jumper traces can be managed by the top over-line trough, the bottom over-line trough, the vertical trough and the horizontal cross-slot to optimize the layout of the traces, and the excess fiber loop can store redundant jumpers.

Use environment:
·Operating temperature:-25ºC~+55ºC

·Relative humidity:≤93%(+40ºC)
·Atmospheric pressure:80KPa~106Kpa

Technical characteristics:
·Connector loss (including insertion, interchange, repetition) ≤ 0.4dB;
·Insertion loss: ≤0.35dB;
·Return loss: PC≥45 dB, UPC≥50dB, APC≥60 dB;
·Insulation resistance: ≥1000MΩ (500V/DC) between metal components and between metal components and ground;
·Electrical strength: 3000V (DC) is applied between metal components and between metal components and ground for 1 min without breakdown or arcing;
·Service life: >20 years.

Specifications:
·Cabinet dimensions:
No.High * wide * deep
SH-ODF-50012000mm×600 mm×300 mm
SH-ODF-50022200mm×600 mm×300 mm
SH-ODF-50032000mm×600 mm×450 mm
SH-ODF-50042200mm×600 mm×450 mm
·Cabinet material thickness:1.2mm~1.5mm
·Cabinet selection: high quality cold rolled or cold rolled tensile steel.


 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours